Skip to content
Structural Pool Repairs

Pool Crack Repair & Leak Detection in Phoenix

Crack injection, stapling, and leak detection to restore your pool's structural integrity.

verified Licensed & Bonded
schedule Same-Day Estimates
star 5.0 Stars

What's Included

check_circle Professional leak detection
check_circle Crack injection repair
check_circle Structural stapling
check_circle Bond coat application
check_circle Expansion joint repair
check_circle Stop water loss

Stop Leaks and Restore Your Pool’s Integrity

Cracks and leaks don’t just waste water—they can cause serious structural damage if left unchecked. The good news? Most pool structural issues can be repaired without the expense of a full rebuild.

Pool crack repair

Signs of Structural Problems

Watch for these warning signs:

  • Visible cracks in the pool shell (even hairline cracks can indicate problems)
  • Losing water faster than normal evaporation (more than 1/4” per day)
  • Wet spots in the yard around the pool
  • Air bubbles in the return lines or pump basket
  • Cracks in the deck near the pool edge

Don’t ignore these signs—early repair prevents expensive damage.

Our Structural Repair Services

Leak Detection

Can’t figure out where the water’s going? We use professional detection methods:

  • Pressure testing of plumbing lines
  • Dye testing around suspected areas
  • Electronic listening devices to detect underground leaks

Finding the leak is half the battle. Once located, we can determine the best repair approach.

Crack Injection

For tight, non-structural cracks, we inject specialized epoxy or polyurethane that bonds with the concrete and flexes slightly to prevent re-cracking. This method works well for:

  • Hairline cracks
  • Settlement cracks
  • Minor surface cracks
Crack injection repair

Structural Stapling

For larger or active cracks, carbon fiber or steel staples provide structural reinforcement:

  1. Route out the crack to proper depth
  2. Install staples across the crack at intervals
  3. Fill with flexible, waterproof material
  4. Smooth and prepare for finishing

This method stops crack movement and provides lasting repair.

Bond Coat Application

Before any resurfacing, the existing shell needs proper preparation:

  • Remove loose or damaged material
  • Apply scratch coat for adhesion
  • Create proper texture for new surface bond

Skipping this step is why some resurfacing jobs fail prematurely.

Expansion Joint Repair

The joint where your pool meets the deck is a common leak source. We repair or replace deteriorated expansion joints to prevent water intrusion that can undermine the deck.

Repair vs. Replace

Our repair-first philosophy means we’ll tell you honestly whether your pool can be repaired or needs more extensive work. Many pools that other contractors recommend demolishing can actually be saved with proper structural repairs.

We recommend repair when:

  • Cracks are isolated and not actively growing
  • The shell is structurally sound overall
  • Leaks are locatable and accessible

More extensive work may be needed when:

  • Multiple large cracks indicate settling
  • The shell is severely deteriorated
  • Plumbing is failing throughout

We’ll give you an honest assessment—never pushing unnecessary work.

Prevent Future Problems

After repairs, consider these preventive measures:

  • Maintain proper water chemistry (improper balance accelerates deterioration)
  • Don’t drain your pool unnecessarily (hydrostatic pressure can pop shells)
  • Address small cracks promptly before they grow
  • Keep deck drainage away from the pool edge

Our Work

Structural Pool Repairs project 1Structural Pool Repairs project 2Structural Pool Repairs project 3Structural Pool Repairs project 4

Our Process

1

Inspection

Thorough assessment to identify all cracks, leaks, and structural issues.

2

Leak Detection

Use pressure tests and dye to locate hidden leaks if suspected.

3

Repair

Apply appropriate repair method - injection, stapling, or patching.

4

Verification

Confirm repair success before resurfacing or refilling.

Frequently Asked Questions

How do I know if my pool has a leak?

expand_more
Signs include: losing more than 1/4 inch of water per day (beyond normal evaporation), wet spots around the pool, air in the pump basket, or constantly needing to add water. We can perform professional leak detection to pinpoint the source.

Can cracks in the pool shell be fixed?

expand_more
Most pool cracks can be repaired successfully using crack injection (for tight cracks) or structural stapling (for wider cracks). The key is addressing them before they worsen. We'll assess whether repair is sufficient or if more extensive work is needed.

Should I fix structural issues before resurfacing?

expand_more
Absolutely. Any cracks or leaks should be repaired before new surface material is applied. Otherwise, the underlying problem will damage your new finish. We always assess structural integrity as part of resurfacing projects.

Pricing

Starting from

$500 /varies by repair

Final price depends on scope and complexity of repairs.

Get Free Quote

No obligation, same-day response

Need Help Deciding?

Not sure which service is right for you? Call us for honest, no-pressure advice.

call (602) 619-1234

Ready to Get Started?

Get a free, no-obligation estimate for your repairs project today.